Optimized die size suits applications requiring 5V regulation within smallest footprint.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Wide input voltage range
- Internal Short-Circuit Current Limiting
- Internal Thermal Overload Protection
- No external components required
- Provides Point-of-Source regulation with lower noise
- x2 magnitude impedance improvement with lower bias current and noise when replacing Zener diode/resistor combinations
- Can be used with power-pass elements to make high-current voltage regulators
- Negative Voltage complement is 79L05
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.416mm² (644.802mil²)
X: 640µm (25mil)
Y: 650µm (26mil)
Request Pad Layout
In Stock: 828920
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.416mm² (644.802mil²)
X: 640µm (25mil)
Y: 650µm (26mil)
Request Pad Layout
In Stock: 828920
Product Families: Used for this device are tabulated below.
Functional:
- Output: Fixed Output
- Output Capacitor: Cap Free, Non-Ceramic
Specification:
VIN (MIN): 7.00V
VIN (MAX): 20.00V
IOUT (MAX): 0.10A
VOUT (MIN): 4.80V
VOUT (MAX): 5.20V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 1.9000mA
Noise Figure: 42µVrms
PSRR @ 100KHz: n/a
VIN (MAX): 20.00V
IOUT (MAX): 0.10A
VOUT (MIN): 4.80V
VOUT (MAX): 5.20V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 1.9000mA
Noise Figure: 42µVrms
PSRR @ 100KHz: n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.